TY - GEN
T1 - Multiport measurement and deembedding techniques for crosstalk study in via arrays
AU - Kotzev, Miroslav
AU - Rimolo-Donadio, Renato
AU - Brans, Heinz Dietrich
AU - Schuster, Christian
PY - 2010
Y1 - 2010
N2 - In this paper the authors present techniques for crosstalk measurements in via arrays using broadband microprobes and a multiport vector network analyzer. The desegmentation method is used for probe deembedding in the bandwidth from 10 MHz up to 50 GHz. In contrast to the common approach which relies on T-matrices the desegmentation procedure ensures flexible fixture extraction using directly the S-parameter or Z- parameter matrices of the multiport network that has to be deembedded. The main advantage of the deembedding by desegmentation technique is that it does not require any S- to T-parameters conversion and if desired allows stepwise extraction of the embedded error networks. A typical application of the desegmentation method is presented by the authors where in the case of microprobe based measurement the error boxes of the microprobes are obtained at first by the use of a two-tier calibration technique and in the next step the desegmentation is applied to remove their detrimental effect on the measurement data.
AB - In this paper the authors present techniques for crosstalk measurements in via arrays using broadband microprobes and a multiport vector network analyzer. The desegmentation method is used for probe deembedding in the bandwidth from 10 MHz up to 50 GHz. In contrast to the common approach which relies on T-matrices the desegmentation procedure ensures flexible fixture extraction using directly the S-parameter or Z- parameter matrices of the multiport network that has to be deembedded. The main advantage of the deembedding by desegmentation technique is that it does not require any S- to T-parameters conversion and if desired allows stepwise extraction of the embedded error networks. A typical application of the desegmentation method is presented by the authors where in the case of microprobe based measurement the error boxes of the microprobes are obtained at first by the use of a two-tier calibration technique and in the next step the desegmentation is applied to remove their detrimental effect on the measurement data.
UR - https://www.scopus.com/pages/publications/77954404848
U2 - 10.1109/SPI.2010.5483580
DO - 10.1109/SPI.2010.5483580
M3 - Contribución a la conferencia
AN - SCOPUS:77954404848
SN - 9781424476107
T3 - 2010 IEEE 14th Workshop on Signal Propagation on Interconnects, SPI 2010 - Proceedings
SP - 47
EP - 50
BT - 2010 IEEE 14th Workshop on Signal Propagation on Interconnects, SPI 2010 - Proceedings
T2 - 2010 IEEE 14th Workshop on Signal Propagation on Interconnects, SPI 2010
Y2 - 9 May 2010 through 12 May 2010
ER -