Finite element analysis of MEMS flexible pressure sensor for total ankle replacement

Marco V.Bedoya Serrano; Paola Vega-Castillo

doi:10.1109/CONCAPAN.2016.7942351

Finite element analysis of MEMS flexible pressure sensor for total ankle replacement

Marco V.Bedoya Serrano
, Paola Vega-Castillo

Escuela de Ingeniería Electrónica

Costa Rica Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

For several decades, research has been conducted for total ankle replacement to be established as the optimal surgical treatment for diseased or degenerative ankle joints. Few reports exist regarding computer assisted surgery (CAS) and patient specific instrumentation for total ankle replacement (TAR), but no studies regarding instrumented ankle prostheses capable of obtaining stress distribution data or related works using sensing technology for improving patient specific instrumentation exist. In this paper, finite element simulations of a thin film piezo electric sensor for obtaining the pressure map of the contact surface are presented. The pressure map would provide potential benefits for component alignment and enhance TAR final outcomes.

Original language	English
Title of host publication	2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781467395786
DOIs	https://doi.org/10.1109/CONCAPAN.2016.7942351
State	Published - 2 Jul 2016
Event	36th IEEE Central American and Panama Convention, CONCAPAN 2016 - San Jose, Costa Rica Duration: 9 Nov 2016 → 11 Nov 2016

Publication series

Name	2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016

Conference

Conference	36th IEEE Central American and Panama Convention, CONCAPAN 2016
Country/Territory	Costa Rica
City	San Jose
Period	9/11/16 → 11/11/16

Keywords

ankle replacement
preoperative navigation system
pressure maps
total joint replacement

Access to Document

10.1109/CONCAPAN.2016.7942351

Cite this

Serrano, M. V. B., & Vega-Castillo, P. (2016). Finite element analysis of MEMS flexible pressure sensor for total ankle replacement. In 2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016 Article 7942351 (2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CONCAPAN.2016.7942351

@inproceedings{bbcfa5d1138d47a190e934a356fe9346,

title = "Finite element analysis of MEMS flexible pressure sensor for total ankle replacement",

abstract = "For several decades, research has been conducted for total ankle replacement to be established as the optimal surgical treatment for diseased or degenerative ankle joints. Few reports exist regarding computer assisted surgery (CAS) and patient specific instrumentation for total ankle replacement (TAR), but no studies regarding instrumented ankle prostheses capable of obtaining stress distribution data or related works using sensing technology for improving patient specific instrumentation exist. In this paper, finite element simulations of a thin film piezo electric sensor for obtaining the pressure map of the contact surface are presented. The pressure map would provide potential benefits for component alignment and enhance TAR final outcomes.",

keywords = "ankle replacement, preoperative navigation system, pressure maps, total joint replacement",

author = "Serrano, \{Marco V.Bedoya\} and Paola Vega-Castillo",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 36th IEEE Central American and Panama Convention, CONCAPAN 2016 ; Conference date: 09-11-2016 Through 11-11-2016",

year = "2016",

month = jul,

day = "2",

doi = "10.1109/CONCAPAN.2016.7942351",

language = "Ingl{\'e}s",

series = "2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016",

}

Serrano, MVB & Vega-Castillo, P 2016, Finite element analysis of MEMS flexible pressure sensor for total ankle replacement. in 2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016., 7942351, 2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016, Institute of Electrical and Electronics Engineers Inc., 36th IEEE Central American and Panama Convention, CONCAPAN 2016, San Jose, Costa Rica, 9/11/16. https://doi.org/10.1109/CONCAPAN.2016.7942351

Finite element analysis of MEMS flexible pressure sensor for total ankle replacement. / Serrano, Marco V.Bedoya; Vega-Castillo, Paola.
2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016. Institute of Electrical and Electronics Engineers Inc., 2016. 7942351 (2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Finite element analysis of MEMS flexible pressure sensor for total ankle replacement

AU - Serrano, Marco V.Bedoya

AU - Vega-Castillo, Paola

PY - 2016/7/2

Y1 - 2016/7/2

N2 - For several decades, research has been conducted for total ankle replacement to be established as the optimal surgical treatment for diseased or degenerative ankle joints. Few reports exist regarding computer assisted surgery (CAS) and patient specific instrumentation for total ankle replacement (TAR), but no studies regarding instrumented ankle prostheses capable of obtaining stress distribution data or related works using sensing technology for improving patient specific instrumentation exist. In this paper, finite element simulations of a thin film piezo electric sensor for obtaining the pressure map of the contact surface are presented. The pressure map would provide potential benefits for component alignment and enhance TAR final outcomes.

AB - For several decades, research has been conducted for total ankle replacement to be established as the optimal surgical treatment for diseased or degenerative ankle joints. Few reports exist regarding computer assisted surgery (CAS) and patient specific instrumentation for total ankle replacement (TAR), but no studies regarding instrumented ankle prostheses capable of obtaining stress distribution data or related works using sensing technology for improving patient specific instrumentation exist. In this paper, finite element simulations of a thin film piezo electric sensor for obtaining the pressure map of the contact surface are presented. The pressure map would provide potential benefits for component alignment and enhance TAR final outcomes.

KW - ankle replacement

KW - preoperative navigation system

KW - pressure maps

KW - total joint replacement

UR - https://www.scopus.com/pages/publications/85021428239

U2 - 10.1109/CONCAPAN.2016.7942351

DO - 10.1109/CONCAPAN.2016.7942351

M3 - Contribución a la conferencia

AN - SCOPUS:85021428239

T3 - 2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016

BT - 2016 IEEE 36th Central American and Panama Convention, CONCAPAN 2016

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 36th IEEE Central American and Panama Convention, CONCAPAN 2016

Y2 - 9 November 2016 through 11 November 2016

ER -

Finite element analysis of MEMS flexible pressure sensor for total ankle replacement

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this